CONTROLLED ENVIRONMENT TESTING 

Clean Room Certification 

If you can't see what you're cleaning, then doesn't matter how frequently or throughly you clean. We want make sure that you have the full peace of mind that nothing is growing in your sterile environment. So with our equipment, we'll test the air and surface in your sterile environments, then send off the samples to our lab to be cultured. We sample for fungal and bacterial growth in the air and on surfaces. We can sample:

  • Clean Rooms
  • Biological Safety Cabinets
  • Laminair Flow Workbenches
  • Compounding Aseptic Contaminate Isolators 
  • Compounding Aseptic Isolators 

Did your first set of samples come back positive for growth? No problem. We'll come back to retest when you feel you are ready, and our technicians will observe the environment to point out any details that may be a cause of the first failure and any other potential signs that could cause future problems. And if you have an environment that's not listed above, ask us about it and we'll see if we can test it!


Have you found a new location that you ready to move to? Is it time to get a new clean air device for you lab or pharmacy? Maybe it's just time to decommission or dispose of an old unit. Either way, you'll need to have that unit decontaminated before it can be moved. Decontamination is also required if HEPA filters and blower motors are to be replaced. The process of decontaminating is kept safe by completely sealing up the unit so that all the gasses at work inside, don't escape into the surrounding environment so any equipment or research inside the room are safe from harm. We provide a Paraformaldehyde decontamination for Biological Safety Cabinets (Class I II and III) and Animal Transfer Stations as these are most commonly what requires decontamination for maintenance and transport, but if you feel it would be more safe to have your particular unit decontaminated, please let us know and we'll set up an appointment to get the work done.

Want to know more about the decontamination process? Go to the Decontamination section of our FAQ and read the step-by-step guide.

Viable air/Surface Sampling

Equipment can break at anytime and cause all work to come to a sudden stop. We like to make sure we can prevent that before it happens. When these unavoidable situations arise, we make it our top priority to repair your equipment as soon as possible so that you don't lose a moment of work. We are well experienced and qualified to repair and maintain:

  • HEPA Filters
  • Blower Motors
  • Sashes (Glass and Balances)
  • Speed Controls
  • Fluorescent/UV Lights (Bulbs and Ballasts)
  • Hydraulic Lift Stands

We also handle conversion kits and updates for any of your equipment, be it a mechanical or software updates.  

Clean air and ventilated equipment Certification

repair

HEPA/ULPA Filter replacement 

Decontamination 

We know how important a proper running clean room is. And we want to help keep it that way. Our certification ensures that your room is operating within its ISO Class requirements, room air changes, and most importantly, make sure its lacking bacterial and fungal growth. Our evaluating includes;

  • Non-Viable Sampling (Particle Count)
  • Air Flow Evaluation
  • Differential Pressure Testing
  • Room Air Changes per Hour (RACH) Calculation
  • Official Room Reports with Certificates

We provide these services for but are not limited too; Laboratories, Pharmacy Compounding, Oncology Compounding, FDA Quality Control, Modular Clean Rooms, and Operating Rooms.

We also understand that rules are always changing for how these rooms operate. That's why we keep up with USP standards and offer consultation for your existing or new clean rooms. Just let us know, and one of our experienced technicians will come out to and guide you to make sure that your facilities will be up-to-date with USP 797 Standards as well as prepare for USP 800 (Proposed) Standards. 

Our certification services will ensure that your equipment is operating properly according to manufacturer specifications. Our technicians are trained to certify and repair most all clean air equipment. Our services cover:

  • Biological Safety Cabinets (Class I, II, and III)
  • Laminar Flow Clean Benches
  • Animal Transfer Stations 
  • Chemical Fume Hoods

There are many different makers of clean air equipment. Here at Titan Tech, we like to make sure our technicians are up-to-date with each manufactures way of calibrating, repair, and knowledge of new products by sending them directly to manufacturer sponsored training courses. This includes; Nuaire, The Baker Company, Labconco, and Thermo Fisher. 

Our technicians are trained and experienced with handling these delicate filters so as not to damage them during the installation process. Before we can schedule an appointment though, we always recommend a pre-appointment prior to the filter change to survey the room, ensuring the correct filters are ordered.